大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

相关分析在大气优化布点过程中的成功演绎

通过相关指数在广东省城市大气环境监测省控站优化组筛选中的实践和探究,表明相关分析是个简单、实用、有效的方法,具有参考和应用价值。     

太湖流域水污染对太湖水质的影响分析

从太湖地区(苏州、无锡、常州、杭州、嘉兴和湖州)的污染物排放量、水质监测结果，以及工农业发展、人口变化、人民生活水平的提高、东太湖萎缩，底泥中营养物的变化和湖泊生态系统失衡的特点入手，分析了太湖流域水污染现状。结果表明，工业废水排放量高于城镇生活废水排放量；太湖湖体、环湖河流水质与省、市边界断面主要超标项目分别为：总磷、总氮和氨氮；水体水质演变是由工农业迅速发展、人口过度增加、污染防治措施相对滞后，以及太湖水生态系统失衡等原因造成的。     

脲酶抑制法检测环境样品中重金属离子研究

为探索利用脲酶快速检测环境样品中重金属离子的最佳条件，系统研究了重金属和缓冲液类型及其浓度对脲酶抑制率的影响。结果表明，不同浓度缓冲液中重金属离子浓度与脲酶抑制率呈显著的相关性，表现为随着重金属离子浓度的增加，脲酶抑制率也提高。缓冲液类型和浓度均能影响重金属对脲酶的抑制作用，其中磷酸缓冲液中，无论是Hg^2 还是Cu^2 对脲酶活性均有较强的抑制作用：在柠檬酸缓冲液中2种离子对脲酶的抑制作用存在显著差异。建立脲酶抑制检测技术的关键是选择合适的缓冲系统。此结果为脲酶抑制法在快速检测重金属离子中最佳检测条件的选择提供了理论依据。     

检测水中亚硫酸还原厌氧梭菌孢子的培养液富集法

水体中亚硫酸协还原菌的孢子，能在水中生存较长时间，容易在水池或管道中滋生，产生黑臭，可作为水体长期或周期性污染的一种指示，但目前国内尚无测定该菌的完整方法，作者建立了一种比较适合我国国情的测定方法，以国产蛋白陈替代胶胨型的水解液，结果阳性特征明显，精密度，重现性均较好。     

水中硫化物在线检测仪的研制

介绍硫离子在线检测仪的测定原理和基本系统结构,仪器采用流动注射法(FIA),具有测定周期短、试剂用量少的优点,该方法(显色剂为对二甲氨基苯胺)测定波长为665nm,工作范围ρ=2.0～25.0mg·L-1。回收率为96.1%～101.8%。     

Enhanced twin pregnancy detection within an open neural tube defect and down syndrome screening protocol using free-beta hCG and AFP

We have applied our multimarker approach of maternal serum alpha-fetoprotein (AFP) and free-beta human chorionic gonadotropin (hCG) for Down syndrome screening to multiple gestations to assess its efficacy for improved detection of twin and triplet pregnancies. This study matched 225 cases of twin pregnancy and 39 cases of triplet pregnancy each with ten singleton pregnancies based on gestational week, race, time to receive sample, time of year of sample, and geographical area. The ratios of the MOM for each group at the tenth, 50th, and 90th percentiles were compared by the Wilcoxon test. Risks for twins were calculated using Bayes' rule, the age-related incidence of twins, and the levels of AFP and free-beta hCG. The tenth, 50th, and 90th percentiles of free-beta hCG MOMs in twin and triplet cases were 0.85, 1.99, and 4.51, and 1.38, 2.78, and 4.07, respectively. For AFP, the MOMs at these percentiles were 1.26, 1.91, and 2.99, and 2.02, 2.68, and 5.30, respectively. The twin and triplet distributions for each marker were statistically significantly different from the singleton distributions (P<0.0001) and from each other (P=0.0012). At a twin risk cut-off of 1 in 50, 77.4 per cent of all twin gestations can be detected in a second-trimester AFP and free-beta hCG screening protocol with 5.1 per cent of singleton pregnancies falsely identified as at risk for twins. Our dual marker protocol for mid-trimester pregnancy screening combining AFP and free-beta hCG can identify over 77 per cent of twin pregnancies in women less than 35 years of age. This benefit may contribute to an improved outcome of pregnancy by early detection of multiple gestation.     

Use of the chemical cleavage of mismatch method for prenatal deficiency diagnosis of alpha-1-antitrypsin

The most common mutation in alpha-1-antitrypsin deficiency, conversion of a G to an A at base 9989 (PI-Z), was detected with the chemical cleavage of mismatch method, demonstrating the power of the method for prenatal diagnosis. Exon V of the gene was amplified using the polymerase chain reaction and heteroduplexes were formed to test for the presence of the mutation. The predicted C mismatch was readily detectable with hydroxylamine, and by making the probe from the chorionic villus sample it was possible to determine that the fetus was heterozygous, not homozygous, for the mutation.     

一种预测左半部成形极限图的简单方法

板材成形性能的评价一般基于成形极限图(FLD)。然而，无论是经由理论计算还是实验方法来获得成形极限图依然很困难而且很耗时。提出了一种预测深拉延部分成形极限图的新方法。假设对所有钢板来说其成形极限图的形状几乎都是一样的，而深拉延变形区域内其失效厚度应变也几乎一样，据此可利用体积不变原理推导出主应变和次应变之间的关系。结果表明，根据此方法计算的左半侧(拉深应变区)成形极限图与实验获得的FLD基本一致。     

吹扫捕集与色谱质谱联用测定水中挥发性有机物

采用吹扫描集与色谱质谱联用的对水中１９种挥发性有机物同时进行富集分离，定性和定量检测，结果表明，不同化合物的平均回收率大于９０％相对偏差小于５％，该方法的检测限约为０．１－０．４μ／Ｌ。实验证明吹扫描集与色谱质谱联用技术是快速测定水中挥发性有要峨的有效手段。